New Product part of the HVAC in a BOX®

now available as loads in High Performance homes go lower, volume of required conditioned air drops, causing a decline in performance for traditional duct systems. The Smart Duct System® was designed with the builders’ requirements in mind as well as the building science community’s input. The right airflow is as important in considering the load per room as the BTUs. The Smart Duct System provides a leakage of 5% or less when properly assembled. Our vision behind this system is called HVAC in a box, allowing the builder eliminate bulkheads and added expenses, while optimizing floor plan designs. The High Performance homes environment appreciates the longer cycles that is offered by the lower airflow in combination of the right BTUs, our “HVAC in a Box®” concept also include zoning capabilities.
This system offers numerous benefits to the builders, building science, mechanical contractor, and the homeowner.
dettson

This well-known Dettson product has gone through important changes and the new version is now on the market . The new version will enable Dettson and its partners to provide an unrivalled offer because of the new product line depth. The Supreme electrical warm air furnace will now offer three new platforms answering different market needs. Here are some of the key new features of the Supreme:
- Improved return design of the pre-punched “knock-offs” patterns for easier overall installation
New cabinet dimensions for supply size of 20″ x 20″
Separately framed elements allowing quick and easy replacement
A fully modulating platform from 0 to 100%
Improvements have been done reflecting feedback from our installation partners, distributors, and homeowners
Allows for our Right-Sized System ®,
in combination with our variable speed (air-to-air heat pump) outdoor cooling unit If you are in a market which uses electricity as the primary heating energy source for residential requirements and want a hassle-free forced-air furnace with no preoccupation while enjoying an extremely silent operation, consider a modulating unit. It will impress you without any doubt. Moreover, if you dare to combine this modulating Supreme with the Dettson cooling unit Alizé, this will be the wisest purchase you will have ever made concerning a home comfort system. Supreme Comfort A platform which offers a galvanised cabinet and a PSC motor only Supreme Advantage.
This well-known Dettson product has gone through important changes and the new version is now on the market . The new version will enable Dettson and its partners to provide an unrivalled offer because of the new product line depth. The Supreme electrical warm air furnace will now offer three new platforms answering different market needs. Here are some of the key new features of the Supreme:
- Improved return design of the pre-punched “knock-offs” patterns for easier overall installation
New cabinet dimensions for supply size of 20″ x 20″
Separately framed elements allowing quick and easy replacement
A fuly modulaitng platform from 0 to 100%
Improvements have been done reflecting feedback from our installation partners, distributors, and homeowners
Allows for our Right-Sized System ®,
in combination with our variable speed (air-to-air heat pump) outdoor cooling unit If you are in a market which uses electricity der output range than teh Comfort platform. Furthermore, the painted cabinet and designer front doors offer an updated look with the option for a variable speed motor. Supreme Modulating It offers the same capacity kW range as the Advantage platform, and in addition a fully 0 to 100% modulating operation (not only a staged operation).
This full modulation of the elements is combined with a variable speed motor in order to fully benefit this advanced control for energy efficient operation. This modulating version of the Supreme also offers the ability to achieve the Right-Sized System® comfort combined with the Alizé modulating cooling unit.
chinook

Chinook Compact gas furnace. This development is a logical continuation to our Chinook gas furnace line-up, offering inputs from 15,000 to 120,000 BRU/h for both new construction and the replacement market Our Chinook gas furnace family offers the smallest footprint of the industry as well as other benefits, as follows:
- A perfect fit to the multi-family segment: condos and apartments from 50 to 150 square meters (500 to 1500 square feet)
10″ wide and 22″ high
The smallest unit for central gas heating
Longer operation cycles
Low air flow rate for thermal comfort and quieter operation
Can be combined to the cooling unit Alizé and thus offers the Right Sized system
CFM from 50 to 400, providing 15,000 BTU in heating mode 1 ton/12,000 BTU in cooling.
Developed in collaboration with gas utilities in both Canada and the USA
The requirements of builders were integrated to meet the new building codes in order to offer an efficient and comfortable home to their customers as well as fewer callback issues for the builder
Cooling - Electric Alizé

In order to increase the comfort benefit provided by the modulation of our Chinook gas furnace, we developed an outdoor unit named Alizé, which offers variable speed cooling. This combination allows the benefits of a variable speed forced-air system for a 12-months period instead of the heating period only. Our outdoor unit which provides variable speed cooling is also an air-to-air heat-pump , thus able to provide heating and cooling in combination with our Chinook gas furnace as well as with our Supreme electrical warm air furnace. The Alizé provides a very small footprint which is welcomed for the backyard, as well as a super silent operation for quieter afternoons on the deck. Dettson is the first HVAC manufacturer to use a side discharge only approach for residential central systems.
Provide the ability to cool or heat, being a heat pump
Side-discharge type, Dettson is the first HVAC manufacturer to go the distance…
Variable speed compressor modulating from 25 to 100%
Quiet outdoor operation, with a maximum range of 49 to 55 dB in full capacity depending on the unit
Air distribution;
- able to deliver very low CFM
Longer operation cycles for better air mixing
Much smaller footprint
Really efficient: 27SEER for 9,000BTU in cooling mode
Low energy consumption in KW
Access to the Right-Sized system, exclusive to Dettson
Stability of ambient temperature
Capacity from 3/4 tonnes to 3 tonnes
Hydronic - Electric Hydra compact

New version available in March 2015 The new Hydra Compact continues the ongoing development of our Hydra electrical boiler family in our quest to use technology for more flexible appliances. This allows to meet the requirements of more efficient hydronic systems for comfort and energy performance. In other words, by being receptive to market feedback, we develop our appliances for improved reliability from users’ input, as well as that of contractors.
- Hydronic heating with lower operation flows
Same interface control as Revolution and Industrial Hydra
Possibility for multi-configurations
Easy to install in limited spaces
Applications for garages, apartments, basements, or additions
More options for the hydronic heating system design technician, as well for the contractor in regards to the number of zones and flow
Available powers 240/208 V
Hydronic - Electric Hydra Revolution

Smallest electrical boiler in the market offering the highest energy efficiency due to its control capabilities.
- Solid state modulation (across all elements)
Certified for copper wiring and aluminum
Mounting bracket included for installation
Presets for four applications : baseboard, light, cast iron and mass
Boost mode : addition of 10 °F to set-point fora period of 24 hours
Displays tank, outdoor and indoor temperature sensor failures
Outdoor sensor
The display shows past alarms and the time they occurred
Light weight (15-20 kW : 60 lb; 24-29 kW : 80 lb)
Dual energy control integrated
Available powers
- 15 Kw
18 Kw
20 Kw
24 Kw
27 Kw
29 Kw
Options
5 possible water pipes installation.
Hydronic - Electric Hydra Industrial

Warm air - Gas Chinook family

- Longer operation cycles
Quiet and continuous operation
Ideal for new constructions
Lower PCM
Do not overheat the house and enables energy savings
Multiposition easy to install
Combined with cooling systems from 9,000BTU to 36,000BTU
Moreover, the Chinook family can also be powered by propane, a simple conversion is necessary, but a kit must be provided at the time of purchase
Warm air - Oil AMT 300 / 400 commercial

- “Low-Boy” with rear flue configuration.
The monobloc design eliminates mechanical joints for airtight configuration.
Residential dual-energy qualified when combined with an electrical coil.
Efficient : Up to 86.7 % AFUE* *
Some models meet the Energy Star requirements. Please refer to the installation instructions or technical specifications of a specific model for details.
Available models
AMT 300 (138 000 to 171 000 BTU/h)
AMT 400 (215 000 to 297 000 BTU/h)
Options
Beckett burner
Riello burner
Warm air - Oil ODH

- “High-Boy”,downflow, horizontal left or right with front flue configuration.
Equipped with a ceramic combustion chamber that has a unique patented “self-aligning” design that withstands temperatures up to 2600°F (1427°C).
Efficient : Up to 85.6 % AFUE. Options Sealed combustion Optimum efficiency and unequivocally performance
Sealed combustion system.
Combustion performed with 100% outdoor air.
Installation without chimney.
Proper furnace operation even under negative pressure.
Options
- Beckett burner
- Riello burner
Warm air - Oil OHB

Comfort and security in all seasons
- “High-Boy”, upflow, with front flue configuration.
Equipped with a ceramic combustion chamber that has a unique patented “self-aligning” design that withstands temperatures up to 2600°F (1427°C).
Efficient : Up to 84.9 % AFUE
Warm air - Oil OLB

Comfort and security in all seasons
- “Low-Boy” with front flue configuration.
Equipped with a ceramic combustion chamber that has a unique patented “self-aligning” design that withstands temperatures up to 2600°F (1427°C).
Efficient : Up to 86,0 % AFUE.
Warm air - Oil AMP 105 / 120

Efficient – Reliable – Economic
- Multiposition installation with front flue configuration.
The use of stainless steel combustion chamber makes the Dettson systems reliable, durable and highly efficient.
The monobloc design eliminates mechanical joints for airtight configuration.
Efficient : Up to 86.8 % AFUE* *Some models meet the Energy Star requirements.
Please refer to the installation instructions or technical specifications of a specific model for details.
Options
Variable speed
Sidewall Venter
Beckett burner
Riello burner
Warm air - Oil AMP 098 / 112 / 154

Versatile – Powerfull – Compact
- Quick connect burner.
Electronic control with cooling option.
Low speed manual blower switch.
Draft regulator.
4 speeds PSC motor.
Stainless Steel heat exchanger.
Efficient : Up to 87.1 % AFUE*. *
These models meet the Energy Star V3 requirements. For more details, please refer to the installation instructions or technical specifications of a specific model.
Options
Variable speed
Sealed combustion
Sidewall venter
Beckett burner
Riello burne
Warm air - Oil AMP 300

Warm air - Oil AMT 100 / 200

Warm air - Oil AMT 098 / 112 / 154

Hydronic - Oil HM200

Hydronic - Oil HMT

Hydronic - Oil HMR

Water heater - Oil CMO

Tank - Oil ROTH oil tank

Warm air - Oil VTK

Warm air - Oil SMH SIDEWALL VENTER

Warm air - Electric DCAH

Warm air - Dual-Energy AME
