Chimneys

St Denis briques et pierres carry the best quality chimneys for your new and existing projects

Security Chimneys International has kept the home fires burning for 50 years by researching and developing the hottest new ideas in residential chimneys and wood-burning fireplaces in today’s hearth markets. Each of our insulated chimneys, built for wood-burning, oil-fired and gas-fired appliances, gives you the peace of mind of knowing that they’re made from high-quality stainless steel, features a 2″ safety clearance from all combustibles and comes with a lifetime limited warranty.

 

New-Secure-Pellet

Secure Pellet

APPLICATIONS

The Security Chimneys model Secure Pellet vent is designed to offer …
Read More

Secure-Temp-S2100

Secure Temp

APPLICATIONS

 The Secure Temp S2100+ has been designed to widely exceed existing …
Read More

Secure-Temp-ASHT-Canada2

Secure Temp ASHT+ for Canada

APPLICATIONS

The Secure Temp ASHT+ is one of the most extensively used …
Read More

Tubinox1

Tubinox™

APPLICATIONS

The TUBINOX stainless steel liner is designed for installation in a …
Read More

SW

Secure Black SW

With the Single Wall (SW) offering in our Secure Black stove pipe …
Read More

DL13

Secure Black DL

The Secure Black Double Wall (DL) stove pipe from Security Chimneys is …
Read More

Dw

Oliver MacLeod Projet DW

Attractive and friendly installation. The Projet DL double-wall black stove pipe can …
Read More

0

Oliver MacLeod Projet Nova-Temp® HT 6000+

The ultimate all-fuel chimney solution. The Projet Nova-Temp® HT6000+ insulated stainless steel, …
Read More

Oliver-MacLeod-Projet-Nova-Temp-HT61031

Oliver MacLeod Projet Nova-Temp® HT6103+

One of the most widely used in North America. The Projet Nova …
Read More

 

Residential

Security Chimneys International has kept the home fires burning for 50 years by researching and developing the hottest new ideas in residential chimneys and wood-burning fireplaces in today’s hearth markets. Each of our insulated chimneys, built for wood-burning, oil-fired and gas-fired appliances, gives you the peace of mind of knowing that they’re made from high-quality stainless steel, features a 2″ safety clearance from all combustibles and comes with a lifetime limited warranty.

Secure Pellet

New-Secure-Pellet

APPLICATIONS

The Security Chimneys model Secure Pellet vent is designed to offer unparalleled strength, resilience and installation ease. Available in 3- and 4-inch diameters with a 1-inch clearance to combustibles, the Secure Pellet is the ideal venting solution for: wood-, pellet- or multi-fuel burning stoves; low-temperature or liquid-fuel-burning appliances. The Secure Pellet venting system is listed with ITS (Intertek Testing Services) and the listing mark is Warnock Hersey. Tested in accordance with the following standards: UL-641, ULC-S609, ULC/ORD-C441(standards for Safety Type L, low-temperature venting systems)

A TRADITION OF EXCELLENCE

For over 50 years, Security Chimneys has been an innovator in the venting field and a market leader in North America. Instrumental in the company’s growth has been an ongoing focus on product improvement and the introduction of new, innovative products. This drive for excellence has given rise to the Secure Pellet venting system, a line of high-quality products that deliver optimal performance.

ENHANCED DURABILITY AND EASE OF INSTALLATION

As a reflection of our ongoing commitment to product quality, the Secure Pellet vent pipe, while reducing installation time and headaches, is engineered to be the most durable and easy-to-install product on the market today. Offered in 3- and 4-inch diameters, the Secure Pellet features a clearance to combustibles of only 1 inch, with improved air tightness at the connecting joint. Plus, with the small clearance to combustibles, the accessories feature a complementary design that makes installation simpler. A silicone gasket has been placed at each female joint to eliminate the need to caulk each joint. From a durability standpoint, Secure Pellet features
enhanced materials that deliver unparalleled corrosion resistance. This includes a 444 stainless steel inner wall and a Galvalume outer casing. Both materials will help ensure product life and maintain a high level of dependable performance over a longer period of time.

Standard Features
  • Available in 3″ and 4″ diameters with a 1″ clearance to combustibles
    Silicone gasket at the female coupling to make installation fast and easy—no silicone sealant needed
    444 stainless steel construction provides better corrosion resistance
    Seam- or laser- welding creates rounder pipe, providing a better fit and making installation easier
    Corrosion-resistant, aluminum-zinc outer casing enhances product life
    Insulated wall thimble helps prevent cold air intrusion and keeps heat inside the house Can also be used for low-temperature or liquid-fuel-burning appliance applications
    Available with black finish, eliminating the need for painting on-site
    Tested and listed in accordance with UL-641, ULC-S609 and ULC/ORD-C441 standards
    Limited lifetime warranty

Secure Temp S2100+

Secure Temp ASHT-Canada
Secure-Temp-S2100

APPLICATIONS

The Secure Temp ASHT+ is one of the most extensively used factory-built venting systems in North America. It has been specially developed for use with oil- and gas-burning heating appliances and certified wood-burning fireplaces. The Secure Temp ASHT+ high-temperature chimney is certified by Intertek Testing (Warnock Hersey) to ULC-S604 standards and ULC-S610 (on wood-burning fireplaces) for all diameters of 5, 6, 7, 8 and 10 inches.

CERTIFICATION

The Secure Temp ASHT+ high-temperature chimney is certified by Intertek Testing (Warnock Hersey) to:

  • ULC-S604 standards for all diameters of 5, 6, 7, 8, and 10 inches.
    ULC-S610 (on wood-burning fireplaces) for all diameters of 5, 6, 7, 8 and 10 inches.
    ULC-S629 for wood stove applications in diameters of 6, 7, and 8 inches.
INSTALLATION

Assembly always requires the male coupler to be positioned upwards. Size the chimney in accordance with the appliance instruction manual. Map out the chimney path closest to the heating unit.
For wood stove applications, a third pipe (premium shield) is required for inside installation where the chimney is enclosed between two floors (see premium shield accessories section). Prior to installation, consult the detailed installation manual included with the support components.

SAFETY

Security Chimneys’s Secure Temp ASHT+ chimneys can be installed as close as 2 inches to combustible materials, regardless of the diameter to be used. Radiation shields and appropriate supports must be used to maintain a safe clearance as the chimney passes through floors and combustible partitions.
Some radiation shields in the Secure Temp ASHT+ line have been designed specifically for use with wood-burning fireplaces. For the use of Secure Temp ASHT+ with manufactured wood fireplaces, refer to the instruction of these products.

Standard Features
  • Twist-lock assembly for fast, easy and secure installation —no screws or other attachments required
    Double-lapped flue seam provides radial expansion with the highest level of durability
    Smooth finish for safe handling during installation
    Secura Plus insulation, pressure-packed to increase flue temperatures for faster start-up, better draft and improved performance
    Available in 5″ to 10″ inside diameters
    2? safety clearance from combustible materials with all diameters
    Available in 8″, 12″, 18″, 24″, 36″ and 48″ lengths
    All installation accessories made from aluminum-zinc coated steel to prevent rusting
    Tested and listed to ULC-S604 and ULC-S610
    Limited lifetime warranty

Secure Temp ASHT+

Secure-Temp-ASHT
APPLICATIONS

The Secure Temp ASHT+ is one of the most extensively used factory-built venting systems in North America. It has been specially developed for use with oil- and gas-burning heating appliances and certified wood-burning fireplaces. The Secure Temp ASHT+ high-temperature chimney is certified by Intertek Testing (Warnock Hersey) to ULC-S604 standards and ULC-S610 (on wood-burning fireplaces) for all diameters of 5, 6, 7, 8 and 10 inches

CERTIFICATION

The Secure Temp ASHT+ high-temperature chimney is certified by Intertek Testing (Warnock Hersey) to:

  • ULC-S604 standards for all diameters of 5, 6, 7, 8, and 10 inches.
    ULC-S610 (on wood-burning fireplaces) for all diameters of 5, 6, 7, 8 and 10 inches.
    ULC-S629 for wood stove applications in diameters of 6, 7, and 8 inches.
INSTALLATION

Assembly always requires the male coupler to be positioned upwards. Size the chimney in accordance with the appliance instruction manual. Map out the chimney path closest to the heating unit.

For wood stove applications, a third pipe (premium shield) is required for inside installation where the chimney is enclosed between two floors (see premium shield accessories section). Prior to installation, consult the detailed installation manual included with the support components.

SAFETY

Security Chimneys’s Secure Temp ASHT+ chimneys can be installed as close as 2 inches to combustible materials, regardless of the diameter to be used. Radiation shields and appropriate supports must be used to maintain a safe clearance as the chimney passes through floors and combustible partitions.

Some radiation shields in the Secure Temp ASHT+ line have been designed specifically for use with wood-burning fireplaces. For the use of Secure Temp ASHT+ with manufactured wood fireplaces, refer to the instruction of these products.

Standard Features
  • Twist-lock assembly for fast, easy and secure installation —no screws or other attachments required
    Double-lapped flue seam provides radial expansion with the highest level of durability
    Smooth finish for safe handling during installation
    Secura Plus insulation, pressure-packed to increase flue temperatures for faster start-up, better draft and improved performance
    Available in 5? to 10? inside diameters
    2″ safety clearance from combustible materials with all diameters
    Available in 8″, 12″, 18″, 24″, 36″ and 48″ lengths
    All installation accessories made from aluminum-zinc coated steel to prevent rusting
    Tested and listed to ULC-S604 and ULC-S610
    Limited lifetime warranty


Tubinox™

Tubinox
APPLICATIONS

The TUBINOX stainless steel liner is designed for
installation in a masonry chimney:

  • when the clay liner of an exisiting chimney is damaged
    to improve the chimney’s draft
    as a substitute of the clay liner in a new masonry chimney

It can be used to vent solid, liquid or gas-fuel fired appliances (coal, wood, oil, etc).

FOR YOUR SAFETY

Time and wear can crack clay liners. Under these conditions, your liner can quickly become a nest for creosote deposits. Should this be the case with your masonry chimney, it would be wise, for safety reasons, to consider the advantages of a TUBINOX stainless steel liner.

The accumulation of creosote inside a chimney can become dangerous. As it is inflammable, creosote is the cause of chimney fires which can spread to become a real danger. The stainless steel liner impedes the adhesion of creosote.

FOR GREAT PERFORMANCE

Controlled-combustion stoves are designed accordingly to highly efficient heat transfer and combustion technologies. Their rate of performance increases when they are installed with a chimney of suitable diameter. Clay liners are often too large. Consequently, they remain too cold and do not allow gas to be completely consumed, a situation which leads to gas condensation, thus formation of creosote.

ADDITIONAL BENEFITS
  • Inexpensive compared to the cost of replacing a damaged masonry chimney. Can be installed in a matter of hours.
    Substitutes the clay liner in a new masonry chimney.
    Improves the chimney’s draft
    Stainless steel, type 304
    All components in the TUBINOX system are made of stainless steel
    Certified to standards: UL-1777, ULC-S635M and ULC-S640M at 2100°F (1150°C).
Standard Features
  • 304 stainless steel renowned for its resistance to corrosion
    Twist-lock assembly for fast, easy and secure installation—no screws or other attachments required
    Double-lock seam provides superior strength and prevents deformation
    Available in 5″ to 8″ inside diameters
    Tested and listed to ULC-S635M, ULC-S640M and UL-1777
    Limited lifetime warranty

 

Secure Black SW

Secure Black SW

With the Single Wall (SW) offering in our Secure Black stove pipe line, Security Chimneys proudly delivers a full line of stove venting products. The SW provides the color match and installation ease that is ideal for your stove connection.

A COLOR THAT COMPLEMENTS

With the SW stove pipe, Security Chimneys is delivering a high-quality, competitive option with several distinct advantages. The matte black finish is one of them. By matching most black steel wood stoves on the market, this high-temperature stove paint provides a near-perfect, seamless transition from appliance to vent pipe. That means installations look significantly better and more aesthetically
attractive than competitive offerings featuring a low-luster black. Customers will appreciate the difference!

INSTALLATION EASE AND QUALITY CONSTRUCTION

With Security Chimney’s exclusive rib-reinforced die-formed male end fitting, installing a single wall pipe will be faster than ever before—helping reduce your valuable time on site and getting installers off to the next job. Simply slide the pipe over and screw in using self-tapping screws supplied to securely lock the SW into place.

With its 24-gauge construction, the SW is highly resilient and rivals any single wall offering available today. Security Chimneys also uses a seam weld to enhance the durability of the pipe. You and your customers can be assured that, even during the most demanding conditions, the SW will continue to perform to the highest standards.

Standard Features
  • Metallic black high-temperature stove paint matches most stoves on the market
    24-gauge seam-welded construction ensures lasting durability and creates a rounder pipe for a better fit
    Exclusive rib-reinforced male end fitting insures a strong joint
    Can be used with all types of wood-burning stoves
    Available in 6″, 7″ and 8″ diameters
    Limited Lifetime Warranty

Secure Black DL

Secure Black DL

The Secure Black Double Wall (DL) stove pipe from Security Chimneys is tested to 2100°F and listed as 6” clearance from combustible materials for all types of wood-burning stoves. The double wall black stove connector features a series of openings, allowing for maximum recovery of heat from flue gases.

A TRADITION OF EXCELLENCE

For over 50 years, Security Chimneys has been an innovator in the venting field and a market leader in North America. Instru-mental in the company’s growth has been an ongoing focus on product improvement and the introduction of new, innovative products. The proven Secure Black Double Wall pipe is just one example of this commitment to engineering solutions that outperform.

SAFE, DURABLE, AND EFFICIENT

With the Secure Black™ Double Wall (DL) pipe, Security Chimneys has designed a product that has been successfully tested to 2100°F at a 6-inch clearance from combustible materials. This level of safety delivers the peace of mind your customers demand. Temperature rating
of 1000°F Max continuous; 1400°F brief forced fired; and 2100°F 30 minutes tested.

The inner liner is made of corrosion-resistant stainless steel, helping to deliver better protection of the exterior finish. The outer wall features a series of openings that allow for maximum recovery of heat from the flue gases. In fact, it is almost as efficient as a single wall black pipe.

DESIGNED FOR INSTALLATION EASE

The Security Double Wall black stove pipe can be safely installed as close as 6 inches to combustible materials, providing greater installation flexibility. Furthermore, it may be used with all types of stoves and is available in diameters of 6, 7 and 8 inches.

To simplify installation, Security Chimneys has designed a telescopic double wall black pipe, which extends from 3-1/2 feet to 5-1/2 feet. There is no need to determine the number of lengths required and no need for cutting—it will adjust to your application.

LONG-LASTING ASSURANCE

Security Chimneys Ltd. warrants a limited lifetime warranty for its double wall black stove pipe.

Standard Features
  • Tested to 2100°F and listed for 6″ clearance to combustible materials, providing significantly more versatility than single-wall pipe
    400-series stainless steel inner liner provides greater durability and product life compared to single-wall pipe
    Double-wall black stove connector features a series of venting slots, allowing maximum heat recovery
    Can be used with all types of wood-burning stoves
    Available in 6″, 7″ and 8″ inside diameters
    Painted black finish is compatible with most stove finishes
    Limited lifetime warranty

Have a question about this product?

Contact us


Oliver MacLeod Projet DW

Dw-237x300.jpg
Attractive and friendly installation.

The Projet DL double-wall black stove pipe can be safely installed as close as 6″ to combustible materials, making it the perfect choice for a wide range of wood-burning stove applications.

Standard Features
  • Tested to 2100°F and listed for 6″ clearance to combustible materials, providing significantly more versatility than single-wall pipe
    400-series stainless steel inner liner provides greater durability and product life compared to single-wall pipe
    Double-wall black stove connector features a series of venting slots, allowing maximum heat recovery
    Can be used with all types of wood-burning stoves
    Available in 6″, 7″ and 8″ inside diameters
    Painted black finish is compatible with most stove finishes
    Limited lifetime warranty

Oliver MacLeod Projet Nova-Temp® HT6000+

Oliver-MacLeod-Projet-Nova

The ultimate all-fuel chimney solution.

The Projet Nova-Temp® HT6000+ insulated stainless steel, high-temperature chimney is tested to 2100°F for use with efficient solid-fuel and oil-, gas- and coal-fired appliances.

Standard Features
  • Twist-lock assembly for fast and easy installation—no screws or other attachments required
    Double-lapped flue seam provides the highest level of durability
    2″ of Secura Plus™ insulation, pressure-packed to increase flue temperatures for faster start-up, better draft and improved performance in all weather conditions
    Available in 6″ to 8″ inside diameters
    2″ safety clearance from combustible materials
    Available in 8″, 12″, 18″, 24″, 36″ and 48″ lengths
    All installation accessories made from aluminum-zinc coated steel to prevent rusting
    Tested and listed to ULC-S629M
    Limited lifetime warranty

Have a question about this product?

Contact Us


Oliver MacLeod Projet Nova-Temp® HT6103+

One of the most widely used in North America.

The Projet Nova Temp™ HT6103+ is one of the most extensively used factory-built venting systems in North America. In Canada, the Projet Nova Temp™ HT6103+ chimney has been certified according to two standards. It has been listed to both the ULC-S629
standard for high- temperature chimneys, used with wood stoves, as well as for Type A chimneys in applications with heating units listed to ULC-S604 standards.

Continuous improvement has made Oliver MacLeod a household name for over 50 years—and one of the most popular lines of venting products in North America. Our Projet Nova Temp™ HT6103+ model is a high-quality Canadian product that ensures end-users benefit from maximum safety. Moreover, for years now, its inner lining and outer casing have provided proven corrosion protection.

Standard Features
  • Twist-lock assembly for fast, easy and secure installation—no screws or other attachments required
    Double-lapped flue seam provides radial expansion and the highest level of durability
    Smooth finish for safe handling during installation
    Secura Plus™ insulation, pressure-packed to increase flue temperatures for faster start-up, better draft and improved performance
    Available in 5″ to 10″ inside diameters
    2″ safety clearance from combustible materials with all diameters
    Available in 8″, 12″, 18″, 24″, 36″ and 48″ lengths
    All installation accessories made from aluminum-zinc coated steel to prevent rusting
    Tested and listed to ULC-S604 and ULC-S610
    Limited lifetime warranty