EXCEL Chimney is Certified to Withstand Chimney Fires
EXCEL chimney is specifically engineered for wood burning stoves, fireplaces and residential furnaces. It is certified for use on appliances that burn wood, oil, coal, gas, and charcoal. It comes in 5”, 6”, 7” & 8” diameters. EXCEL was the first 1 inch wall chimney to pass the ULC standard.
Applications
EXCEL chimney is suitable for use on appliances that burn:
- Wood
- Oil
- Coal
- Gas
- Charcoal
- It is specifically engineered for wood burning stoves, fireplaces and residential furnaces.
Allowable Flue Gas Temperatures
- Max Continuous 650°C (1200°F)
- Brief Forced Firing 925°C (1700°F)
- Tested To 1150°C (2100°F)
EXCELDirect® features:
- The easiest to install in the industry
- The most leak free system available
- A smooth and clean appearance, looks like stove pipe
Applications
EXCELDirect® is a certified venting system designed to be used only with certified direct vent gas fired appliances
Superior Quality Construction
- Continuously welded seams – no leaks, no possibility of seam separation
- Type 304 stainless steel
- All stainless steel components
- Factory hemmed ends – smooth, safe surfaces – no more cuts
- All stainless steel rivets provided with each liner section
- Pre-punched holes – no drilling required
- Easy to install
- Lifetime Warranty
Applications
EXCELiner is certified as a chimney liner for use on appliances that burn:
- Wood
- Oil
- Natural or LP Gas
Allowable Flue Gas Temperatures
- Max Continuous 650°C (1200°F)
- Brief Forced Firing 925°C (1700°F)
- Tested To 1150°C (2100°F)
Setting a new standard for Pellet Vent performance, appearance and ease of installation
EXCELPellet Design features:
- Laser welded stainless steel flue resists corrosion from all agricultural products including corn.
- Laser welded galvalume steel outer casing. The primary applications for galvalume are automotive and metal building cladding. It is much more corrosion resistant than galvanized and is designed to be painted.
- Lifetime warranted pure silicone gasket is 100% leak proof eliminating the need for field application of silicone.
- Smooth clean exterior finish looks like single wall pipe.
- Very easy to paint in the field.
EXCELPellet is certified as a chimney liner for use on appliances that burn wood, agricultural products and natural gas and is available in 3” & 4” diameters.
Applications
EXCELPellet is certified as a chimney liner for use on appliances that burn:
- Wood
- Agricultural products
- Natural or LP Gas
Allowable Flue Gas Temperatures
- Max Continuous 300°C (572°F)
- Tested To 927°C (1700 °F)
EXCELPrime is premium single wall smoke pipe for wood burning stoves.
No assembly required.
All lengths are laser welded out of heavy wall 24ga satincoat steel. EXCELPrime is available in 6”, 7”, and 8” diameters.
EXCELPrime – Premium single wall smoke pipe
Features
- Heavy wall, 24ga satincoat steel
- Truly scratch resistant
- Superior paint adhesion
- Highly corrosion resistant inside and out
- Laser welded seams
Perfectly round
- No assembly required (no snap lock)
- Fast, easy installation
- Attractive design
Smooth exterior
- No unsightly beads or bumps
- Stove Bright, Flat Black paint
Highest paint quality
- Matches more stoves than any other paint
- Easy to touch up
- 100%, no questions asked 5 year replacement warranty
Allowable Flue Gas Temperatures
- Max Continuous 650°C (1000°F)
- Brief Forced Firing 925°C (1400°F)
- Tested To 1150°C (2100°F)
- Clearance to Combustible Materials
- Model RIS is certified for 2” clearance to combustible materials.
Model RIS is a type “A” factory-built chimney suitable for venting negative or neutral draft (non-pressurized) appliances including boilers, building heating equipment, fireplaces and stoves. RIS has been designed, tested, and listed to vent large wood burning fireplaces and to extend masonry chimneys.
Model RIS – Large diameter insulated chimney
Model RIS is large diameter insulated chimney suitable for use on appliances that burn wood, oil, coal, natural gas and charcoal and is available in 10” through 24” diameters.
RIS chimney is suitable for use on appliances that burn:
- Wood
- Oil
- Coal
- Natural or LP Gas
- Charcoal
ULTRABlack is designed to be used as a connector between a freestanding oil, wood or coal burning stove and a masonry or metal chimney. There are four primary advantages to ULTRABlack over single wall connector pipes:
- It offers reduced clearance to combustible materials.
- It is designed to last the lifetime of the stove and/or chimney system.
- It offers reduced creosote formation.
- It is certified for use with mobile home stoves.
Never, ever buy another stove pipe
Only ULTRABlack is covered by a true, no questions asked, 100% full replacement, LIFETIME WARRANTY
Hi-tech Performance – Old Fashioned Appearance
Double Wall Construction with a 3/8” air space between inner and outer pipes provides superior insulating value to single wall pipe. Better insulating value keeps flue gas temperatures higher. This helps your woodstove perform with an enhanced draft, which provides:
- less chance for moisture or soot build up within the vent
- reduced smoking of the stove at start up increased efficiency
- ULTRABlack not only keeps the flue temperatures higher, it keeps the outer pipe temperatures cooler. This allows ULTRABlack to be installed with only 6” clearance to combustible materials. Single wall stove pipe requires an 18” clearance, which typically means your wood stove sits further away from the wall and takes up valuable space within the room. Most attractive double wall product on the market; no unsightly slots or vents
The outer casing is constructed of Satin coat steel. Satin coat is attractive and durable when painted. ULTRABlack is painted with Forrest “Stove Bright” premium quality, high temperature paint to provide a rich appearance that complements your woodstove.
The ULTRABlack double wall stove pipe is designed to be used as a connector between a freestanding oil, wood or coal burning stove and a masonry or metal chimney and is available in 6”, 7” & 8” diameters.